Recent Article
Home » Audio Editor » Audio Editor Master

Audio Editor Master

This software allows users to perform professional editing functions such as cut, copy, mixing tracks, apply filters, and effects to an audio file and many more features.

I will show you each of the important features of this application by walking you through on each of the menus available on the Audio Editor Master’s interface. But before we start, please review the system requirement of the application.

  • Windows 2000/Me/XP/Vista
  • Intel Pentium II class 400 MHz processor or better
  • 4x CD-ROM drive or better
  • A sound card
  • Microphone (optional)

Official site:


File Menu

Figure 1. Main Interface.

The GUI (graphical user interface) shows menus located on the top of the window and also almost all menus are also available on the left hand side of the GUI which are vertically arranged.


From the Figure 1. The main option under this menu is ‘New‘. Of course, if you hit the ‘New‘ button, a new window will appear as shown in the figure below. (Figure 2.) You can choose your desired sampling rate from 6,000 to 96,000Hz. You can also change the channels settings either Stereo or Mono and that depends on your purpose.

Figure 2. New Sample.


There are two (2) ways to open a file.  First, you can directly hit the ‘Open‘ button or second, click on the the little ‘down arrow‘ next the ‘open’ button and that will give you the following options.

A. Open as… (Ctrl+F2)             B. Open append…(Ctrl+F3)               C. Reload current file (Ctrl+R)

The figure below shows the supported file format that can be loaded into the application (Figure 3).

Figure 3. Supported file formats.


The shortcut key in saving a file is just like any the ones in most applications, just press (Ctrl+S). That will save whatever file you are working on.

Hitting ‘Save as…‘ allows you to save or port the file into another format. See Figure 4.

Figure 4. File formats when you choose to ‘Save as…‘ file into another format.

You can extend some other options that you would like to set by hitting ‘Config’ button next to the file formats drop down menu. And it will display Figure 5.

Figure 5. Config window.

From the figure above, the user can use presets and just drag the ‘bar’ to define the size and quality of the output file. Moreover, if you rather choose to specify your own settings, just tick the radio button next to ‘Specify Settings:‘ and hit configure to display Figure 6.

Figure 6. Advanced options window to specify settings.

Figure 6, is very straight forward. It’s just drop down menus and horizontal bars that you have to drag to define a setting.

Save selection as…‘ will only activate if the user selects a part of an audio file, and save the selected part as a new audio file.

File>Audio CD Burner

Users can create high-quality CDs from your MP3 or WAV files. The created music CDs can be played in any player.


Show the properties of current file.

General: Show current file’s general information such as the file’s name, size, location…
Summary: Show current file’s tag information and users can edit the information.


Close the current file, but not quit the application.


Exits the application.

Now let’s move on to the Edit Menu.

Edit Menu” contains of many useful operations. Those operations are concentrated in windows operation.

Figure 7. The main edit menu.


This function can help users to back up to last step. Honestly, I was not able to figure out how many undos it can go backwards. But as far as I could remember, I tried around 19  undos and it was able to make it.


This option is use to restore the last action on the waveform.


Copy the selection and put it in a temporary file.


Cut the selected part of an audio file and puts it to the clipboard. (Cut and paste is supported)


Insert copied contents at the insertion point.

Overwrite: Replace the selected data with the contents of the clipboard.
Replicate: Paste the clipboard contents to the current data window with two situations.
Mix paste: Mix the clipboard contents and the current selected contents together.

 Edit>Mix from file…

Figure 8. Mix from file… window

Selected part: The amplification percent for the selected part of an audio file. Varies from 0 to 100.
Audio in the buffer: The amplification percent for an audio array in the buffer. Varies from 0 to 100.
if mix audio is longer than selection: It can tick “Increase selection” or “Insert silence” to make the selection is equal with the pasteboard’s data.


Add trim effect to the selected parts of the audio file.

Figure 9. Trim’s option

Amplitude: Maximal amplitude in db, which is considered as silence, from -92 db to 0

Time of trim fade: Time of trim fade, in ms.

Type of trim: The type of trim. Can be one of the following types: trim from left, right or from both sides of trim level.


Remove the selection without putting it on the clipboard.

Figure 10. Options for ‘Delete’

Delete silence: Delete the selected region’s silence.

Threshold: The threshold audio level (in db). It is negative value, like “-40″. It varies from -92 to 0. It is varies from -92 to 0.

Attack Time: The period of audio (in ms) below the given threshold before assuming the silence is started. Usually the value of attack time property is much less than release time.

Release Time: The period of audio (in ms) above the given threshold after it is determined to be the end of the silence.

Trim digital silence: Delete the selected region’s silence, and other unselected data. Only the selected region remains.

Crop: The opposite function with “Delete selection”. It deletes the entire audio file except the selected region.

Crop start: Delete the region which is behind of cursor.

Crop end: Delete the region which is in front of cursor.

Here are the remaining remarkable features of the program.


Figure 11. Effects


Figure 12. Filters


Figure 13. Generate and Noise reduction

Figure 14. Tools

For more details, please visit the official website here.

To purchase the program, buy here.

About admin